China Copper clad Steel Stranded wire Manufacturers want to attach the screws

.Choose The Height of Your Shower Curtain RodTo choose the height of your shower curtain rod you will typically want to measure 5″ to 6″ above the height of the shower and make a mark. Adjust the length of the rod so it fits snuggly inside of the brackets and does not allow any room for wiggling. Using an electric-powered drill with a screwdriver bit, you will China Copper clad Steel Stranded wire Manufacturers want to attach the screws that were sent with the shower curtain rod. Apply a slight amount of pressure to make sure that the brackets will hold the weight of the rings and the shower curtain once they instal it.Add Your Shower Curtain Rings And Shower CurtainNow you will need to remove one end of the shower curtain rod and begin threading on the rings that will hold your shower curtain.Mark Where The End Caps Will GoOnce you have determined the height of the shower curtain rod, you will want to put the end caps or brackets against the wall and make your marks. For some people it may be easier to attach the rings to the curtain before you begin this step, but if you have not, you will need to do it after it threads the ringsonto the shower curtain rod. Center them over the marks that you previously created, and either draw a circle around them, or mark the top, bottom, and sides to ensure they are installed evenly on both sides. This height will leave plenty of space above the shower for the rod and rings while also making sure that the shower curtain will have enough length to drape over the tub.Install The Brackets On the WallAfter it has marked the end capsonto the wall, you can install them.Install the Shower Curtain Rod Onto The BracketsAfter both brackets, or end caps, have been attached to the wall securely, you will want to insert the shower curtain rod. The end caps should have holes that you can use to affix them properly.Installing a new shower curtain rod in your bathroom is a fairly straightforward project. However, if you realize that you are having problems getting it installed or what to make sure you are doing it right, you will want to follow the basic directions that we have outlined for you below